The Exploding Floors of 9-11
September 3, 2009
The Exploding Floors of 9-11
This newly released footage of the demolitions of WTC 7 and WTC 1 (North Tower) is very significant. There are several important aspects of the demolitions of 9-11 that are proven by these videos. The first is the incredible amount of pulverization of the concrete in WTC 7, which can be seen in the billowing pyroclastic clouds of dust rolling down the streets during its unexplained collapse at 5:25 p.m. on 9-11. Pyroclastic clouds are usually associated with volcanoes and are composed chiefly of rock fragments of explosive origin.
The pyroclastic clouds of dust were primarily composed of the concrete floors of the towers – and everything on them. This dust was not caused by a collapse but by a layer of super-thermite that had been applied directly to the floors, most likely on their undersides that were hidden from view – on the steel pans that held the lightweight concrete. The floor pans were exploded on 9-11 with most of the force of the blast directed downwards. There was no collapse. If the towers had collapsed or pancaked as the official report claims, there should have been a stack of 100 floor pans in the rubble, yet none were to be seen.
The dust clouds seen flowing down the street following the collapse of the 47-story Salomon Building, built and owned by Larry Silverstein, are identical to the pyroclastic clouds that accompanied the demolition and collapses of the Twin Towers, WTC 1 and 2. These dust clouds were caused by a super-explosive, a nano-composite form of thermite, fragments of which were found in the dust and identified by Dr. Steven E. Jones of Brigham Young University and others.
Chips of the super-thermite that pulverized the World Trade Center.
(Steven E. Jones et al, 2009)
This is the incredibly powerful explosive that evidently pulverized the 110 four-inch thick light-weight concrete floors of each tower. Besides reducing these concrete layers to pyroclastic dust, this super-thermite also destroyed everything on each floor and blew everything to smithereens and propelled the huge dust clouds of pulverized debris down the streets of lower Manhattan. The floors of the Twin Towers were exploded in a way that indicates that the super-thermite must have been in direct contact with the four-inch thick concrete floors or the metal pans the concrete was poured into. This is fairly obvious because these structures were primarily steel and glass towers with concrete floors. The only other surfaces would have been the temporary dry wall constructions on each floor, the suspended ceilings, plumbing, and elevator shafts. There was not much else in the way of surfaces that could have been applied with super-thermite.
This is why the newly-released video of the demolition of the North Tower is so important. It clearly shows that the floors and exterior walls were exploded first and that the crucial weight-bearing core columns of the tower were still standing! (NIST, please explain that and the absence of 110 floor pans stacked up in the rubble. How did 220 steel floor pans disappear?)
This is crucial evidence that helps explain how the towers were demolished. The floors and structures around the core were evidently exploded first – and then the core columns were cut with steel-cutting thermite charges, explosions that were shrouded by the dust and noise of the exploding floors. This is quite unlike the logical progression of a normal collapse even in the case of demolition. This is to say that the 47 weight-bearing core columns were not cut first leading to the collapses. The destruction of the Twin Towers were not really collapses although the demolition of WTC 7 resulted in a collapse that resembled a normal controlled demolition.
The 110 floors of each tower were simply exploded before, blowing downwards and away from the cores in a way that was designed to look like a collapse. There was one problem: the “collapses” fell faster than an object in free fall. This was the first solid piece of evidence that the towers had been demolished with explosives. The “collapses” occurred faster than the laws of physics allow — because they were not natural collapses. If they had been natural collapses there would have been layers of concrete pancaked on top of each other in the rubble pile, which is what often happens to multi-level buildings in strong earthquakes. We would expect to find 110 slabs of concrete and their steel pans stacked on top of each other, yet there is no evidence that any of these floor pans were found in the rubble, much less 110 of them stacked up. Where did these 220 steel floor pans go? How could they have simply disappeared? The fact that they were not found stacked up in the rubble clearly disproves the official version (NIST) of the “collapses” of the Twin Towers.
Many tons of steel from the Twin Towers were melted instantly by the super-thermite bi-layered explosive material found by Dr. Steven E. Jones in the dust. This is proven by the iron spheres found in the dust, as this image from the USGS survey clearly shows. This sphere is a solidified droplet of molten iron, the product of a thermitic reaction. This is evidently what happened to the 220 steel floor pans. In the wink of an eye they were melted by the detonation of the layer of super-thermite, which had probably been sprayed on their undersides, and then pulverized by the layer of organic material which had been added to the nano-thermite to create the gas pressure and explosive effect.
As we know there were no such solid remains of floor pans or the concrete floors of the Twin Towers — absolutely everything was reduced to dust, except for the structural steel that remained, although some of that was also vaporized. This is what the super-thermite did on 9-11. It exploded the concrete floors and everything on them. There was no so-called pancake collapse. This is certainly obvious to anyone who views these videos. Why have NIST and the media lied to the public that the demolitions were collapses caused by steel structures weakened by fire? This is pure rubbish.
Why is this video footage of the demolition of the North Tower so important? Because it suggests that the pulverizing super-thermite (a sol gel energetic bi-layer film) was applied directly to the acre-sized concrete floors surrounding the 47 core columns. That is to say that the super-thermite layer was evidently in direct contact with the floors in areas occupied by tenants, and not in the core area, which we can see remained standing for several seconds after the floors around it had been exploded away. So, how was this thermitic material applied to the floors? Was it sprayed to the undersides of the floor pans or was it applied to the floors themselves, perhaps disguised as a floor covering or as a layer beneath the floor covering? Perhaps it was applied to the floors in several ways.
One reader wrote to me after the show with Kevin Barrett with this interesting comment:
During the interview, you speculated that the nano thermite may have been sprayed on the floor during the asbestos abatement process while removing linoleum. Not to put too fine a point on it, but the asbestos abatement process would be removing the fireproofing from the floor trusses by accessing the trusses through the suspended ceiling located below. In other words, the sol jell could have been sprayed on the floor pans (which is 15-20 ga steel decking supported by the trusses that the concrete is poured in) and hidden by the ceiling tiles in the same day. No problem. Other areas of sol jell application would include the core columns located within the elevator shafts Ace Elevator was working on. If you think about it, as energetic as nano thermite is, relatively little sol jell would be needed for the exterior columns, and it would explain the shearing occurring at convenient truck size lengths.
It seems most likely that the undersides of the steel floor pans is where the super-thermite was applied. If the pans were sprayed with a layer of super-thermite disguised as a coating of rust-proofing for example, the force of the blast would be directed downwards. The steel pan and the concrete of the floor would be pulverized but the direction of the explosions would be downwards and outwards, which is what we see in the video. As each floor was detonated, the blast would be forced downwards by the steel and concrete above it. The blast would hit the floor below it and hasten the collapse. This is what seems to have occurred judging by the video evidence.
In my article, “Who Put Super-Thermite in the Twin Towers?” of July 20, 2009, I discuss how the super-thermite might have been put in the towers. One of the possible disguises for applying the thin layer of super-thermite could have been as a coating sprayed during asbestos abatement work in the towers, as the reader said in the comment above. As I wrote in this article:
We do know that a million-dollar contract for asbestos abatement in the twin towers had been put up for bids by contractors in the fall of 2000, exactly one year before 9-11:
Contract WTC-115.310 – The World Trade Center Removal and Disposal of Vinyl Asbestos Floor Tiles and Other Incidental Asbestos-Containing Building Materials Via Work Order Estimate Range: $1,000,000 annually Bids due Tuesday, October 17, 2000. (advertised by the PA on September 12, 2000)
Kevin Barrett asked me how I can say that the super-thermite was produced by the Zionists who I allege are behind 9-11? As I said in the interview, at this point I cannot say with absolute certainty that the nano-composite was made by Israeli scientists in the nuclear bomb factory near Dimona, but I suspect it was. It is a deduction I have made in the same way one solves an algebra problem. If we know the result of the equation and all of the factors except one we can determine the missing factor. This is what I have done. Every other aspect of this false-flag terror atrocity was done by Israelis or Zionists committed to Israel so I would conclude that Israelis were involved in the manufacture and application of the super-thermite in the World Trade Center towers that were demolished on 9-11, all three of them.
What we really need to find at this point is the names of the people who were responsible for placing the super-thermite in the towers and how it was done. When we have that information we will be able to determine who made the material and provided it. Then we will have the true culprits of 9-11. As we already know, this material was certainly not made by Osama Bin Laden and Al Qaida or the Taliban. We can safely say that no Muslim or Arab state or entity was responsible for loading the Twin Towers and WTC 7 with this advanced form of super-thermite. The government and media interpretation of 9-11 is, therefore, nothing but a pack of lies. This means that the war in Afghanistan has nothing whatsoever to do with 9-11 — except that it is being done on behalf of those who carried out the false-flag terror attacks.
We must remember that we really have nothing to fear but fear itself. The ones who are truly afraid are those who carried out 9-11 and those who have assisted in this massive hoax and cover-up. They, the real terrorists of 9-11, are trembling with fear and unable to sleep. We need to be dedicated, determined, and tenacious in finding the guilty parties and exposing them.
Note: Due to the transfer of information from the original website to this updated format, some article post dates may differ from the date they were originally published. However, most articles contain the actual publish date at the top of the article.